Dimensions and specifications for freestanding woodfires for properties over 2 hectares

Royale RU heating area 180sqm* flue size 150mm firebox size height 300mm width 440mm depth 370mm

Lady Kitchener RU heating area 200sqm* hot water output 3 or 5kw hot water tapings 1” BSP flue size 150mm firebox size height 340mm width 320mm depth 500mm

Contessa RU heating area 200sqm* hot water output 3 or 5kw hot water tapings 1” BSP flue size 150mm firebox size height 340mm width 460mm depth 370mm

Bronte Rear Outlet RU heating area 150sqm* hot water output 3kw hot water tapings 1” BSP flue size 150mm firebox size height 330mm width 410mm

Lower Pedestal Standard

Bronte Top Outlet RU heating area 150sqm* hot water output 3kw hot water tapings 1” BSP flue size 150mm firebox size height 330mm width 410mm depth  300mm

Coaster Multi Fuel heating area 200sqm* hot water output 3 or 5kw hot water tapings 1” BSP flue size 150mm firebox size coal wood height 320mm 350mm width 460mm 460mm depth 320m 380mm

Zealandia Multi Fuel heating area 200sqm* hot water output 3 or 5kw hot water tapings 1” BSP flue size 150mm firebox size coal wood height 260mm 320mm width 400mm 400mm depth 240m 300mm

Viking RU heating area 200sqm* flue size 150mm hot water output   3kw    hot water tapings    1” BSP    firebox size height 340mm width 320mm depth  500mm

*Measurements shown are for units on a Pedestal or Drawer base, except the Zealandia and Coaster. For the Lady Kitchener, Contessa and Bronte Top Outlet on legs add 70mm to vertical heights given. For Bronte Rear Outlet add 95mm to vertical height given.
*200sqm = 3 to 4 bedroom home, 150sqm = 2 to 3 bedroom home (estimated for a fully insulated house with 2.4m high stud, situated in average climate conditions).

Installation clearances for freestanding woodfires in rural areas all clearances are with flue pipe shield

Clearances are in accordance with the requirements of AS/NZS 2918:2001and are to a heat sensitive material

	A	B	C	D	E	F	G	H	J	K	L	M	N	O	FLOOR PROTECTOR NOTE NUMBER	WATER HEATING OPTIONAL EXTRA
Royale RU
with flue shield	100	200	300	110	50	200	520	330	810	930	1200	1030	730	500	3
no flue shield	300	200	300	110	100	400	520	400	810	1130	1280	1090	810	500	3
Lady Kitchener RU
pedestal & drawer base	100	240	300	100	95	270	495	395	710	1050	1365	1145	780	540	2	3 or 5 kw wetback
leg base	100	240	300	100	95	270	495	395	710	1050	1365	1145	780	540	3
Contessa RU                                *Clearances A, F and K can be reduced by 30mm provided a Contessa Cooktop Grill is fitted to the fire
pedestal & drawer base	130*	280	420	110	100	260*	600	420	860	1055*	1380	1200	795	600	2	3 or 5 kw wetback
leg base	130*	280	350	110	100	260*	600	420	860	985*	1310	1130	725	600	3
Viking RU
leg base	100	320	300	120	50	260	590	350	780	1040	1280	1060	780	410	3	3 or 5 kw wetback
Bronte Rear Outlet RU > into chimney cavity
pedestal & drawer base	100	245	470	100	n/a	n/a	550	n/a	810	1035	n/a	n/a	n/a	630	2	3 kw wetback
leg base	100	245	405	100	n/a	n/a	550	n/a	810	970	n/a	n/a	n/a	630	3
Bronte Top Outlet RU
pedestal & drawer base	100	245	330	100	100	230	555	405	810	895	1240	1090	665	630	2	3 kw wetback
leg base	100	245	300	100	100	230	555	405	810	865	1210	1070	635	630	3
Coaster Multi Fuel
leg base	100	275	300	110	100	230	595	420	860	905	1270	1095	675	600	3	3 or 5 kw wetback
Zealandia Multi Fuel
leg base	150	350	380	100	130	280	655	430	810	995	1315	1120	715	530	3	3 or 5 kw weback

NOTES:

1. Refer to owners manual for complete installation instructions and ensure compliance with building codes and regulations.
2. Fires with a ‘2’ require an insulated floor protector to the requirements of AS/NZS 2918:2001. Measurements shown are for a 40mm insulated floor protector.
3. Fires noted ‘3’ require an ash floor protector to AS/NZS 2918:2001.
4. To gain more efficiency, we recommend installing an ‘Energy Saver’ flue system that reduces heat loss by up to 40%, acts as a fire stop and reduces wind and traffic noise.