Wider front for greater ambience.

East/west (wide, not deep) configuration means this fire doesn’t intrude into the room and has a wider view of the fire. A generous fire for big homes with plenty of customisation options. The Contessa AG has a hot water heater option situated in the second chamber of the firebox, which adds to the efficiency.

Contessa AG Features:

  • Suitable for large homes over 150 square metres
  • ECan and MFE approved
  • Cast iron top plate suitable for cooking
  • 10 year warranty

AG = Air Guard - ECan approved for air sheds rated 1.0g/kg emissions or less.

RU = Rural - Suitable for properties over 2 hectares and not restricted by clean air regulations.

Urban = MFE approved for air sheds rated for 1.5g/kg emissions.

  • Contessa AG
  • Contessa AG

Tiles

Red
Red
Steely Blue
Steely Blue
Charcoal
Charcoal
Steely Grey
Steely Grey
Antique Copper
Antique Copper
Matt Black
Matt Black
Latte
Latte
Polished Black
Polished Black
Lightning
Lightning
Rust Slate
Rust Slate

Dimensions

*200sqm = 3 to 4 bedroom home, 150sqm = 2 to 3 bedroom home (estimated for a fully insulated house with 2.4m high stud, situated in average climate conditions).

Options

Installation Clearances for Freestanding Woodfires

Notes:

  1. Refer to owners manual for complete installation instructions and ensure compliance with building codes and regulations.
  2. Fires with a '2' require an insulated floor protector to the requirements of AS/NZS 2918:2001. Measurements shown are for a 40mm insulated floor protector.
  3. Fires noted '3' require an ash floor protector to AS/NZS 2918:2001.
  4. To gain more efficiency, we recommend you install an 'Energy Saver' flue system that can reduce heat loss, act as a fire stop and reduce wind and traffic noise.
  5. The product dimensions and specifications in this brochure apply at the date of print. Under our policy of continuous improvement, Hewitsons reserves the right to alter specifications or product from that shown.

  • All clearances are with flue pipe shield and are to a heat sensitive material

    Clearances are in accordance with the requirements of AS/NZS 2918:2001

  • Installation Clearances

Fire Suitable For: